A wreath made of pine cones step by step. DIY New Year's wreath made of pine cones: step-by-step master classes, photos, design. Photo of mono cone wreaths for the New Year

home / Thoughts

The tradition of hanging a New Year's wreath of pine cones and fir branches on a door or window came to our country from Europe. For Western culture, such decoration is a symbol of Christmas, joy and hope for happiness in the new year. In Russia, this decorative element does not have religious connotations. But on the other hand, it creates a festive mood and evokes dreams of the speedy fulfillment of all desires. From our article you will learn how to make a wreath of pine cones with your own hands and attract good luck to your home. Perhaps the creative process will captivate you so much that you decide to give an unusual gift to your friends, acquaintances and work colleagues.

Classic wreath of pine cones. Master Class

Making for home is a very enjoyable and joyful process. Put your love for your loved ones into it and feel how everyone around you becomes kinder. To make a wreath of pine cones, we will need the following materials:

Sheet of cardboard.
Several old newspapers or kraft paper.
Scotch.
Fir branches or voluminous green tinsel.
Plastic red balls of different sizes, large decorative snowflakes, ribbons and beads.
Fir cones.
Walnuts and hazelnuts, rose hips.
Water-based matte paint.
Scissors.
Glue gun.

Making the base

First, we decide what size the finished pine cone wreath will be. To make the decoration look harmonious, multiply the size of the internal diameter by 1.6 and get the size of the external one. When you are done with the calculations, cut out a round piece from cardboard. To give the future wreath volume, take the paper and crumple it with your hands. We apply the resulting tourniquet to the cardboard ring and secure it in a circle with tape. Cut off all excess with scissors. Some craftsmen prefer to use a base of branches or twigs, which are connected with twine and twisted into a ring.

Attaching spruce branches

If you want your pine cone wreath to delight you until spring, then use nobles branches (this is a spruce variety) to decorate it. Otherwise, it will very soon lose its beautiful appearance, and you will have to constantly remove the fallen needles. If you don't find the material you need at your nearest flower shop, don't be discouraged. It can be replaced with bulk tinsel, which is sold in any supermarket. So, using a glue gun, we attach the branches to the base. You can also use staples or twine - if you do everything carefully, the appearance will not suffer at all.

Decoration

Typically, a Christmas wreath of pine cones is decorated in red and white, and we will do the same:

We take bright Christmas balls, carefully break off the stem from them and place them at the same distance from each other.
Glue snowflakes on it in random order.
Using small red balls (you can use gift fillers) and thin wooden sticks, we make an imitation of ilix branches. We supplement our composition with them.
We paint the nuts with white paint in two layers and glue them to the branches.
We glue the rosehips together so that we get small clusters and place them next to the balls.
We clean the fir cones and paint their tips white - it should seem like they are dusted with snow. Using hot glue, attach them to the wreath in any order.

Finishing touch

We take beautiful white and red ribbons, wrap them around the branches and finish the job. This wreath of pine cones and fir branches will look great on the doors of your home. You can also take a large boiling-white candle, place it in the center of the circle and decorate the holiday table with the resulting composition.

Snow-white wreath of pine cones. Master Class

We invite you to make another original decoration that will help create a festive atmosphere in your apartment or country house and lift the spirits of its inhabitants. We will need:

Thin long branches of a bush.
Fir cones.
Plastic toys.
A can of white paint or artificial snow.
Hair fixation spray.
Glitter.
and wire.

Let's get started

Twist the branches into a circle of the desired size and secure them securely with wire. Cut off all excess with scissors and paint the base white. To avoid getting your hands dirty, use rubber gloves.
Cover the pine cones with hairspray and immediately apply glitter to them.
If you wish, you can braid the wreath with silver ribbons, bows or beads.
When the paint is dry, attach Christmas tree decorations and pine cones to the base.

Custom jewelry

A wreath of pine cones can be decorated in a dozen different ways. Some people prefer the traditional version, while others approach the process of creating New Year's decor with a bit of humor. For example, some people decorate the wreath with dried orange slices, seashells, tea bags, coffee filters, and other waste materials. But we suggest you make a special, sweet wreath of pine cones. How to give another gift to children for Christmas? To do this, you should prepare the following materials:

Cardboard.
Sheet of foam rubber.
White bandage.
Fir or pine cones.
Plastic balls of different sizes and colors.
Chocolate candies in candy wrappers.
Ribbons, beads and bows for decoration.
Scissors, double-sided tape.

Operating procedure

First, make a round base out of cardboard and glue foam rubber onto it. Using scissors, carefully align the edges.
Take a regular medical bandage and wrap it around the future wreath so that there are no gaps.
Apply glitter to the fir cones using a spray can. Place them evenly around the entire circumference, leaving enough free space. Glue bright plastic balls and ribbons nearby.
Let's move on to the most important and pleasant moment: choosing light candies that are shaped like a truffle. We glue our sweets to the bottom and attach them to the wreath in random order. Try to fill all the free space with them.
To make the wreath lush, straighten the tops of the candy wrappers with your hands and wrap silver rain or tinsel around the candies.
Complete the New Year's wreath of pine cones and candies with soft toys and small gifts. Remember that kids will happily feast on available treats and check every day to see if Santa Claus has brought them another trinket. Therefore, be prepared to regularly replenish your thinning decoration with new sweet elements.

We hope that you find our tips useful and that this original pine cone wreath will decorate your door during the long holiday holidays. In addition, you can always give an unusual gift to your friends and relatives by adding, for example, a bottle of champagne or good red wine.

Decorating the interior of a house or apartment is a very exciting and probably the most enjoyable part of preparing for the New Year and Christmas. Especially if you decide to make accessories yourself. The main thing is that the decor evokes a feeling of comfort, joy and some mystery. A DIY Christmas wreath of pine cones will become a traditional and at the same time very original decoration for your home.

Christmas wreath made of pine cones

Photo by Shutterstock

An ordinary cone can be an excellent material for creativity. For example, you can use it to make a Christmas wreath. In this case, the cones can be either spruce or pine, both whole and their parts (“scales”). To make your composition look more rich and interesting, it can be supplemented with several glass balls, ribbons, a luminous garland and other New Year's accessories.

Master class: Christmas wreath made of pine cones and fir branches

To work you will need:

spruce or pine branches (you can replace them with thuja or cypress, the latter crumble less and do not prick, which will be important for you during work)
spruce and pine cones (you can use one type, or you can make a composition from different types of cones)
strong wire that holds its shape well for the base of the wreath, and thin wire for fastening branches
liquid nails or heat gun
additional decorations – balls, ribbons, garlands
acrylic paint in cans, or pearlescent nail polish, or spray for decorating flowers

In order for the wreath to be durable and serve you as decoration for many years, you need to make a good base for it. To do this, twist the wire into a ring with the diameter of the future wreath. If you do not have wire of the required quality, you can purchase ready-made bases for wreaths at specialized handicraft stores.

There are metal hangers for clothes in almost every home. Make a ring out of them, bending them to a circle shape. This will be your basis for the wreath, and even complete with a hook

First, prepare the branches: cut them all to the same length (about 10 cm). Then use a thin wire to attach the first layer of spruce branches to the ring, evenly distributing it around the entire perimeter. It is important to attach the branches clockwise, making sure that the base of the wreath does not deform during work and remains round.

Then proceed to attach the second layer of branches. You need to secure it counterclockwise. If the branches are thick enough and you applied them tightly, then you will not need a third layer. If it seems to you that the wreath is not magnificent enough, then you will have to put another layer of branches again in a clockwise direction. When the base of the wreath is ready, start decorating it. For decoration you will need cones. Any will not do. It would be correct to select specimens of approximately the same size: not too large, but not small either.

Medium-sized cones are easy to plant on liquid nails, because... too large ones may fall off, and small ones will look bad in the overall design

The cones can be attached in their natural form, or they can be decorated by covering them with white silver or gold spray paint, glitter, etc. Even nail polish will do. After decorating the cones, try them on. To do this, place all the selected cones around the perimeter of the wreath, placing them in a free order to create an interesting composition. They should not cover the entire composition with a continuous carpet or accumulate in one place. Most likely, 5-6 cones arranged in a circle will be enough. There are no exact instructions here, so rely on your taste or get inspiration from other examples.

Now attach the pine cones to the wreath using liquid nails or a heat gun. But if you doubt the reliability of such a design, you can screw them to the wreath with wire.

To make the composition look complete and more elegant, add several beautiful beads, rowan sprigs or New Year's balls to the branches and cones. Finally, wrap the wreath with ribbon and tie a beautiful bow. Lastly, attach a pendant to the wreath - a special hook or ribbon with which you will hang your hand-made masterpiece on the wall.

Master class: wreath of pine cones

You can make a very interesting Christmas wreath from just pine cones. It is done quite simply and has a spectacular, snow-covered appearance.

For a long time now, one of the symbols of such a holiday as the New Year has been decorating the house. In order to create a holiday atmosphere, Christmas trees are decorated in houses, garlands are hung and New Year's wreaths are attached, which are considered an integral decoration of the interior during the winter holidays. In order to make holiday wreaths, there is no need to purchase expensive materials, because it can be made, for example, from pine cones, which can be collected while walking through the forest. Therefore, today we will give you a master class on how to make such a decoration from pine cones for the New Year, which will be accompanied by step-by-step photographs and educational video lessons. You can see a photo selection of finished products below.

Video selection for inspiration

This article will offer a selection of master classes from YouTube, thanks to which needlewomen will be able to understand the basic principles of work when making New Year's wreaths from pine cones. The video below will show not only how to make a wreath, but also how to properly prepare the cones for work, how they can be arranged into a single composition, and what other decorative elements the cones are best combined with.

Wreath of pine cones for the New Year: step-by-step MK with photos

In order to make a wreath of pine cones for the New Year, you will need, first of all, pine cones, these can be pine or alder cones. Also required for work: floral paint, newspapers, tape, paper towel, hot glue, ribbons and Christmas tree decorations.

To form the basis of a future product, it is necessary to prepare either newspapers or magazines. Then you need to twist several sheets of newsprint or magazine sheets together and secure them with tape. The result should be a circle, the main thing is to ensure that the thickness of the layer is the same. Then use hot glue to secure the paper towel over the entire area of the circle. Next, you need to wrap the entire base of the wreath as tightly as possible with twine. Once the base is ready, you can begin decorating the product.

It is better to place larger cones in the center, attaching them with a hot gun, and smaller cones - at the edges. It is advisable not to glue the pine cones too close to each other, as the gaps can be filled with other decorations. Alder cones can be painted using floral paint from a can and glued into existing voids. You can also attach small Christmas tree decorations, glue ribbons, beads, attach cinnamon sticks, add a colorful bow, and the product is ready.

Based on clothes hanger

There is another option for making a wreath; for this you will need pine cones, a metal hanger or wire that will be used as a base, as well as white spray paint, hot glue, decorative tape and beads. First, you need to bend the hanger so that you get a ring with a hook, then each cone should be painted with white paint, sprayed with it from a spray can, then beads must be attached to each cone, due to which the cones will be strung on the base. After this, you can attach a voluminous bow made of satin ribbon, and the product is ready.

Wreath of pine cones for the New Year without a base

You can make a wreath in which the pine cones will be both the basis and decoration. To do this, the collected cones must be glued into a circle using a heat gun to form the first layer, which will become the base. Then you need to glue the second layer of cones on top. After this, you can attach other decorative elements, such as tinsel, and secure the ribbon, and the work can be considered complete.

The master class “Wreath of Pine Cones for the New Year” will delight those who like to prepare for the holiday in advance and create beautiful decor with their own hands. A wreath is a traditional New Year's decoration that came to Russia from Western culture, or rather from the Catholic faith. Traditionally, Catholics decorated the wreath with four candles, which were lit in turn on each Sunday of Lent (four weeks before Christmas). The wreath symbolized the anticipation of a bright holiday and the eternity of life.

Usually the wreath is hung on the door or placed on the table. A New Year's wreath can cozy decorate candles, decorate a candlestick, or combine several large candles.

Of course, such a decorative element can be bought in a ready-made form in the store. Usually this is a wreath made of artificial fir branches, decorated with artificial flowers, bows, and balls. But it is much more pleasant to make decorations with your own hands from simple natural materials.

Creating a decorative element

According to tradition, the wreath is made from spruce branches, which perhaps symbolizes the infinity of life, its constant renewal, since spruce is an evergreen plant. However, not everyone can get spruce branches in winter. In addition, real branches quickly crumble and break, and artificial ones do not always look attractive and natural. Therefore, the best option is cones.

The cones not only imitate spruce needles and look as lush as spruce branches, but are also well suited for creativity and crafts. Many people are probably familiar with this material since childhood. The cones are painted very well, glued to surfaces, and pierced with an awl. In addition, the cones do not break, they are light and smell pleasant. This is an excellent material for a New Year's wreath.

To make a wreath of pine cones, the most important thing is to understand the principle of operation, and then you can give free rein to your imagination.

So, the following materials and tools are needed:

round base (blank from the store or made yourself);
cones (spruce or pine);
decorative elements (beads, tinsel, ribbons, accessories);
glue gun;
non-toxic paint.

Perhaps the main difficulty for many is the round base. Not every home has a spare hoop that would be perfect for a Christmas wreath. However, other available materials are also suitable for a round base.

The simplest thing you can think of is a metal wire hanger. It needs to be given a round shape, and the wire must be carefully untwisted at one end in order to string cones and other decor onto it.

The hanger hook must be left, it will be needed to hang the wreath. It can be decorated with a bow, “hidden” under ribbons and other decor.

Another great idea for a base is regular newspaper. You need to twist several sheets of newspaper and roll them into a ring. The edges can be secured with a stapler. To curl the newspaper more tightly, you can coat it with PVA. The top of the folded ring is wrapped with tape, which is painted with paint.

An easier way is to use a hardboard base. You will need a piece of hardboard approximately 40x40 cm. Two circles are marked on it - a large one and a smaller one in the center. It is necessary to follow the contour several times with a stationery knife, each time directing the blade deeper. Then the unnecessary parts are simply broken off along the contour.

The edges do not have to be perfectly smooth; there is no need to align them, since they will still be hidden under the decor.

The base of twigs and twigs also looks nice. You can buy it at a craft store or make it yourself if you have some skill and suitable materials. To do this, it is better to use well-bending, elastic branches, for example, willow. They need to be woven together like a nest. The edges should intertwine with each other. For greater reliability, they can be tied with twine or other inconspicuous rope.

Progress:

Take the base and, if necessary, wrap it in a beautiful fabric or paint it in gray, silver or golden color (to match the tone of the future decor);

Attach the cones to the base in a circle - using a glue gun, rings or toothpicks (to do this, you need to pierce each cone with an awl and insert a toothpick, secure with glue - a good option if the base is made of foam);

The cones must be distributed evenly, depending on the composition being made, but so that the entire surface of the base is covered and is not visible;

If desired, paint the cones with spray paint and sprinkle with glitter;

Supplement the wreath with decorative elements - beads, tinsel, ribbons.

Of course, cones can be combined with other materials - tinsel, balls, spruce branches, bows, citrus fruits. Cones can only be one of the additional decorations. All elements are also attached using a glue gun; ribbon, tinsel and string can simply be tied onto the cones. Overall this could make a nice Christmas arrangement.